Ultrafuse® TPU 95A
Flexible Filament based on BASF Elastollan®
Ultrafuse® TPU 95A has been developed specificially to enable fast and easy printing with a flexible filament for Fused Filament Fabrication. By building on the legacy of BASF‘s decades of experience in flexible materials, this material is based on the established thermoplastic polyurethane Elastollan, standing for maximum reliability, consistent product quality and cost efficiency.
Material Details
- Product Leaflet
- Technical Data Sheet: EN, FR, ES, DE, ZH
- Safety Data Sheet: EN, other languages
- Printing Profiles
Description
With its outstanding abrasion resistance, Ultrafuse® TPU 95A presents an excellent choice for wear and tear ap- plications. Parts printed with this material set themselves apart by high elongation at break, great layer adhesion and a god resistance to oils as well as industrially used chemicals.
Ultrafuse® TPU 95A comes with a well-balanced profile of flexibility and durability. On top of that, it allows for easier and faster printing then softer TPU grades.
Due to its good printing behavior, Ultrafuse® TPU 95A is a good choice for starting printing flexible materials on both direct drive and bowden style printers.
Sustainability Check
Recycled Packaging
Generally recyclable
Benefits at a Glance
- Perfect for fast printing
- High abrasion resistance
- Easy to handle
- Good resistance to oils and common industrially used chemicals
- Printable on direct drive and bowden style printers
- Biocompatible
Example Applications
- Functional flexible parts
- Wear and tear application
Material Properties
- Shore A Hardness: 92
- Abrasion Resistance: 64 mm3
- Compression set at 23°C, 72h: 38%
- Stress at Break: 44.2 MPa (XY), 12,2 MPa (ZX)
- Elongation at Break: 661 % (XY), 192 % (ZX)
- Tear Strength: 90 kN/m (XY), 8 kN/m (XZ), 14 kN/m (ZX)
Printing Guidelines*
- Nozzle Temperature: 210-230 °C
- Bed Temperature: 40°C
- Bed Material: Glass
- Nozzle Diameter: ≥ 0.4 mm
- Print Speed: 14-112 mm / s**
* The product data is provided in good faith and represents typical properties based on our current knowledge and experience; these data are not to be construed as specification limits or mini- mum values. Product properties may be changed without notice. This document does not create any liability, warranty or guarantee of product performance. It is the buyer’s responsibility to determine the suitability of Ultrafuse® products for the intended application.
** To achieve faster printing speeds, it may be necessary to raise the nozzle temperature. The highest speed mentioned has been determined through our latest tests, ensuring optimal surface quality with a 0.4mm nozzle and 0.2mm layer height. Please note that as printing technology and equipment evolve, we anticipate the possibility of achieving even faster speeds in the future.
Next Steps
Get in touch
Do you have questions about our materials, technologies or services? Get in touch now!
More Ultrafuse® Flexible Filaments
Ultrafuse® TPU 85A
First Flexible BASF Filament Based on Elastollan®
Benefits at a Glance
- High wear and abrasion resistance
- Very good low-temperature flexibility
Ultrafuse® TPU 64D
Ultrafuse® TPU 64D combines the best of two worlds by being a strong yet flexible filament for Fused Filament Fabrication, suitable for all FFF technologies.
Benefits at a Glance
- High resistance to oils, greases, oxygen and ozone
- High wear and abrasion resistance
Ultrafuse® TPS 90A
Ultrafuse® TPS 90A has been developed especially for Fused Filament Fabrication and delivers an outstandingly soft-touch surface.
Benefits at a Glance
- Soft touch
- Non-slip properties