Ultrafuse® ABS Fusion+

Efficient Engineering-filament. Printing for non-print Engineers

ABS Fusion+ made with Polyscope XILOYTM 3D is an engineering filament which has been optimized for 3D printing. This special grade has been developed in collaboration with Polyscope Polymers renowned for its material solutions in the automotive industry. ABS is a thermoplastic which is used in many applications.

Buy the material


Ultrafuse® ABS Fusion+ is an easy-to-print engineering material and enables a much more efficient printing process. Meaning 3D printing operators will spend less time tinkering and more time exploiting the full potential of your 3D printing rig. To top it off, Ultrafuse® ABS Fusion+ adheres to water-soluble support – no more hassle with chemicals, just dissolve your support in water after printing!

The 3D printing community has so far considered ABS an unforgiving material: Now, thanks to the unique properties of ABS Fusion+ you can look forward to a high success rate with greatly improved dimensional stability.

Sustainability Check

Recycled Packaging

Generally recyclable

Benefits at a Glance

  • Easy to print
  • Direct printing on heated glass or print bed surfaces
  • High heat resistance
  • Adheres to water soluble support

Example Applications

  • Jigs and fixtures
  • Automotive part

Material Properties

  • Tensile Strength (MPa): 17.9 (ZX), 29.5 (XY)
  • Flexural Modulus (MPa): 878 (ZX), 1133 (XZ), 1406 (XY)
  • Elongation at Break: 2.1 % (ZX), 10.9 % (XY)
  • Impact Strength Izod notched (kJ/m2): 2.2 (ZX), 38.4 (XZ), 26.4 (XY)
  • Impact Strength Izod unnotched (kJ/m2): 6.6 (ZX), 131.1 (XZ), 73.1 (XY)
  • HDT @ 0.45 MPa: 91 oC

Printing Guidelines*

  • Nozzle Temperature: 240-260 °C
  • Build Chamber Temperature: -
  • Bed Temperature: 100 - 120 °C
  • Bed Material: Glass (use a small amount of adhesive spray to protect the glass bed)
  • Nozzle Diameter: ≥ 0.4 mm
  • Print Speed: 40 - 300** mm / s

The product data is provided in good faith and represents typical properties based on our current knowledge and experience; these data are not to be construed as specification limits or mini- mum values. Product properties may be changed without notice. This document does not create any liability, warranty or guarantee of product performance. It is the buyer’s responsibility to determine the suitability of Ultrafuse® products for the intended application.

** To achieve faster printing speeds, it may be necessary to raise the nozzle temperature. The highest speed mentioned has been determined through our latest tests, ensuring optimal surface quality with a 0.4mm nozzle and 0.2mm layer height. Please note that as printing technology and equipment evolve, we anticipate the possibility of achieving even faster speeds in the future.

Use Cases and Whitepaper of Ultrafuse® ABS Fusion+

Next Steps

Get in touch

Do you have questions about our materials, technologies or services? Get in touch now!

Get in touch

More Ultrafuse® Engineering Filaments