Flexible / Elastomeric Line
Flexible / Elastic Reactive Urethane Photopolymer Material
Forward AM’s Flexible / Elastic Ultracur3D® FL/EL reactive urethane photopolymers deliver high elongation at break, combining high cushioning with long-term rebound and torsional strength thanks to their minimal structural degradation over time. The Flexible / Elastic Ultracur3D® FL/EL line requires no thermal post-curing and replaces traditional finishing-intensive silicon, urethane and butyl rubber molding, minimizing redesign cycle time and cutting your prototype development expenditure.
Ultracur3D® FL/EL Products Portfolio
Application Examples: Footwear, Functional Prototyping, Cushioning Pads, Flexible Grip
Ultracur3D® FL 300
Reactive Urethane Photopolymer for Flexible Applications
Material Properties
- Very low hardness (Shore 39A)
- Superior elongation at break
Ultracur3D® FL 60
Reactive Urethane Photopolymer for Flexible Applications
Material Properties
- Low hardness (Shore 73A)
- Very good haptic
- Very stable clear color, no yellowing
Ultracur3D® EL 60
Reactive Urethane Photopolymer for Elastic Applications
Material Properties
- Low hardness (Shore 71A)
- Low water uptake
- Very easy to print
- Almost no compression set
Ultracur3D® EL 150
Reactive Urethane Photopolymer for Elastic Applications
Material Properties
- Medium hardness (Shore 78A)
- Optimum combination of high strength, elongation at break and rebound
Next Steps
Get in touch
Do you have questions about our materials, technologies or services? Get in touch now!